Dell E30S Series User Manual

Table 11. AC PSU status indicator (continued)
Convention Power Indicator
Pattern
Description
two identical PSUs receive different input voltages, they can output
different wattages, and trigger a mismatch.
CAUTION: If two PSUs are used, they must be of the same type and
have the same maximum output power.
CAUTION: Combining AC and DC PSUs is not supported and triggers a
mismatch.
E Not lit Power is not connected.
Indicator codes for non-redundant power supply unit
Press the self-diagnostic button to perform a quick health check on the non-redundant power supply unit (PSU) of the system.
Figure 11. Non-redundant AC PSU status indicator and self-diagnostic button
1. self-diagnostic button
2. AC PSU status indicator
Table 12. Indicator codes for non-redundant power supply unit
Diagnostic Indicator Pattern Description
Not lit Power is not connected or PSU is faulty.
Green A valid power source is connected to the PSU and the PSU is operational.
Internal dual SD module indicator codes
The Internal Dual SD module (IDSDM) provides you with a redundant SD card solution. You can configure the IDSDM for storage
or as the OS boot partition. The IDSDM card offers the following features:
● Dual card operation — maintains a mirrored configuration by using SD cards in both the slots and provides redundancy.
NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of System Setup, the
information is replicated from one SD card to another.
● Single card operation — single card operation is supported, but without redundancy.
Dell PowerEdge T430 system overview 25

Dell E30S Series Specifications

General

Brand	Dell
Model	E30S Series
Category	Server
Language	English