Table 15. Connector descriptions for SAS with H755 MX+ on board PCIe
From To
BP_PWR_1 (backplane power connector) SIG_PWR_0 (system board power connector)
BP_DST_PA1 (backplane PCIe 1 connector, cable marking
BP_PA1)
SL1_CPU1_PA1 (signal connector on the system board, cable
marking MB SL1)
BP_DST_SA1 (backplane SAS connector, cable marking BP
SA1)
CTRL_SRC_SA1 (SAS connector of H755 MX controller card,
cable marking CTRL_SA1)
BP_DST_PB1 (backplane PCIe 2 connector, cable marking BP
PB1)
SL2_CPU1_PB1 (signal connector on the system board, cable
marking MB SL2)
Figure 40. SAS/PCIe cabling diagram of configuration 10 - 4 x 2.5-inch Universal backplane with H745P MX (Jumbo
PERC) + on board PCIe
Table 16. Connector descriptions for SAS with H745P MX + on board PCIe
From To
BP_PWR_1 (backplane power connector) SIG_PWR_0 (system board power connector)
BP_DST_PA1 (backplane PCIe 1 connector, cable marking BP
PA1)
SL1_CPU1_PA1 (signal connector on the system board, cable
marking MB SL1)
BP_DST_SA1 (backplane SAS connector, cable marking BP
SA1)
CTRL_SRC_SA1 (SAS connector of H745P MX controller
card, cable marking CTRL_SA1)
BP_DST_PB1 (backplane PCIe 2 connector, cable marking BP
PB1)
SL2_CPU1_PB1 (signal connector on the system board, cable
marking MB SL2)
Installing and removing system components 45
To Next Page
Loading...
