Dell EQUALLOGIC PS6500 - Removing and Installing the Bezel

PS6500 Hardware Maintenance Basic Array Information
1-8
Removing and Installing the Bezel
You must remove the bezel to access the array front panel, which shows the LCD panel and disk activity LEDs and
provides access to the power button. Also, you must remove the bezel to access the cam screws that lock the
chassis cover.
To unlock and remove the bezel:
1. Insert the bezel key and turn it clockwise to unlock the bezel. See Figure 1-12.
Figure 1-12: Unlocking the Bezel
2. Push the bezel release latch up to disengage the bezel from the chassis. See Figure 1-13.
Figure 1-13: Pushing Up the Bezel Release Latch
3. Hold the bezel and pull the bezel away from the chassis. See Figure 1-14.