Dell Force10 E300 - Power Requirements

36 | Installing RPMs, Line Cards, and SFMs
www.dell.com | support.dell.com
Figure 7-3. SFM
Table 7-2 describes the SFM front panel and LEDs.
Figure 7-4. Installing an SFM
Table 7-2. SFM Front Panel and LED Descriptions
LED Description
Active Green: active and passing traffic
Unlit: in standby mode
Status Flashing Green: booting
Green: operational
Amber: fault detected
Unlit: no power
fn00018c
fn00128a
fn00128a