d. Lift the GPU board from the computer [4].
Installing the GPU board
1. Place the GPU board on the computer.
2. Tighten the screws to secure the pull tab to the GPU board.
3. Place the GPU socket on the board.
4. Tighten the screws to secure the socket to the computer.
5. Install the:
a. docking board
b. base cover
c. optical drive
d. hard drive
e. battery
6. Follow the procedure in After working inside your computer.
Subscriber Identity Module(SIM) board
Removing the SIM module
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. battery
b. hard drive
c. optical drive
d. base cover
3. To remove the SIM module:
a. Lift the latch [1] and disconnect the SIM module cable [2].
b. Remove the screws that secure the SIM module to the computer [3].
c. Remove the SIM module from the computer [4].
Disassembly and reassembly
29
To Next Page
Loading...
