Option Description
Keyboard
Illumination
You can choose the operating mode of the keyboard illumination feature. The keyboard brightness level
can be set from 25 % to 100%. The options are:
● Disabled
● Dim. This option is enabled by default.
● Bright
Keyboard
Backlight
Timeout on AC
The Keyboard Backlight with AC option does not affect the main keyboard illumination feature. Keyboard
Illumination continues to support the various illumination levels. The options are:
● 5 seconds
● 10 seconds. This option is selected by default.
● 15 seconds
● 30 seconds
● 1 minute
● 5 minute
● 15 minute
● Never
Keyboard
Backlight
Timeout on
Battery
The Keyboard Backlight with Battery option does not affect the main keyboard illumination feature.
Keyboard Illumination continues to support the various illumination levels. The options are:
● 5 seconds
● 10 seconds. This option is selected by default.
● 15 seconds
● 30 seconds
● 1 minute
● 5 minute
● 15 minute
● Never
RGB Keyboard
Backlight
You can configure the RGB keyboard backlight feature. There are six available colors: four preset colors
(white, red, green, and blue) and two user configurable colors
Touchscreen You can enable or disable the touchscreen.
This option is enabled by default.
Stealth Mode
Control
You can enable or disable the stealth mode.
This option is enabled by default.
Video screen options
Option
Description
LCD Brightness Allows you to set the display brightness depending up on the power source (On Battery and On AC).
NOTE: The video setting will be visible only when a video card is installed into the system.
Security screen options
Option
Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard drive password. Deleting
the admin password automatically deletes the system password and the hard drive password.
NOTE: Password changes take effect immediately.
By default, the drive will not have a password set.
72 System setup
To Next Page
Loading...
