Dell Latitude 3140 2 in 1 - Power-Adapter Port

1. Align and replace the 4-cell battery into the computer chassis.
2. Route the battery cable through the routing channels between the system board and 4-cell battery.
3. Affix the adhesive tapes to secure the 4-cell battery to the computer chassis.
4. Replace the five screws (M2x3) to secure the 4-cell battery in place.
5. Connect the battery cable to the system board.
1. Install the palmrest and keyboard assembly.
2. Follow the procedure in after working inside your computer.
Power-adapter port
Removing the power-adapter port
1. Follow the procedure in before working inside your computer.
2. Remove the palmrest and keyboard assembly.
The following image indicates the location of the power-adapter port and provides a visual representation of the removal
procedure.
Removing and installing components
33