1. Insert the front-facing camera module into the slot on the display cover.
2. Connect the display cable to the front-facing camera module.
1. Install the display panel.
2. For laptops, install the display bezel; for 2-in-1 computers, install the touch-panel assembly.
3. Install the display assembly for laptops, or display assembly for 2-in-1s.
4. Install the palmrest and keyboard assembly.
5. Follow the procedure in after working inside your computer.
Display cable
Removing the display cable
1. Follow the procedure in before working inside your computer.
2. Remove the palmrest and keyboard assembly.
3. Remove the display assembly for laptops, or display assembly for 2-in-1s.
4. For laptops, remove the display bezel; for 2-in-1 computers, remove the touch-panel assembly.
5. Remove the display panel.
The following image indicates the location of the display cable and provides a visual representation of the removal procedure.
Removing and installing components
73
To Next Page
Loading...
