1. Align and affix the display cable on the display cover.
2. Route the display cable through the routing channel on the bottom-left side of the display cover.
3. Affix the tape to the left hinge to secure the display cable.
4. Connect the display cable to the user-facing camera module.
1. Install the display panel.
2. For laptops, install the display bezel; for 2-in-1 computers, install the touch-panel assembly.
3. Install the display assembly for laptops, or display assembly for 2-in-1s.
4. Install the palmrest and keyboard assembly.
5. Follow the procedure in after working inside your computer.
Display hinges
Removing the display hinge
1. Follow the procedure in before working inside your computer.
2. Remove the palmrest and keyboard assembly.
3. Remove the display assembly for laptops, or display assembly for 2-in-1s.
4. For laptops, remove the display bezel; for 2-in-1 computers, remove the touch-panel assembly.
5. Remove the display panel.
The following image indicates the location of the display hinge and provides a visual representation of the removal procedure.
Removing and installing components
75
To Next Page
Loading...
