1. Align the notch on the SSD with the tab on the M.2 card slot and slide the SSD into the slot on the system board.
2. Replace the SSD thermal plate, press to fit it firmly to cover the SSD.
3. Replace the two screws (M2x3) to secure the SSD to the M.2 card slot on system board.
1. Install the palmrest and keyboard assembly.
2. Follow the procedure in after working inside your computer.
Speakers
Removing the speakers (Laptop)
1. Follow the procedure in before working inside your computer.
2. Remove the palmrest and keyboard assembly.
The following image indicates the location of the speakers and provides a visual representation of the removal procedure.
22
Removing and installing components
To Next Page
Loading...
