Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.
Recommended tools
The procedures in this document require the following tools:
• Phillips #0 screwdriver
• Phillips #1 screwdriver
• Plastic scribe
NOTE: The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
Screw size list
Table 1. Screw size list
Component M2x2 M2x2OD
5(Ni)
Mx3 M2x4 M2.5x2.5 M2.5x5 M2.0x5.5 M3x3 2.0D
0.8+2.2L
K 5D .8T
UC NL
Hinge Bracket L + R to
LCD cover
2 8
Hinge Bracket L + R to
LCD cover
2 6
LCD Module to LCD cover 4
TP DOME SUPP BRK to
palmrest
2
CLICKPCB_SUPP_BRK_A
SSY to palmrest
4
Thermal (GPU) to System
board (For DSC)
3
Type C BRK to System
board
1
HDD BRK to HDD Module 4
Dc-IN to palmrest 1
System board to palmrest 1
2
Removing and installing components 11
To Next Page
Loading...
