3 Install the: .
a battery
b base cover
4 Follow the procedure in After working inside your computer.
Speakers
Removing the speakers
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c SSD
3 To remove the speakers:
a Disconnect the speaker cable from the connector on the system board [1].
b Remove the adhesive tape that secures the speaker cable to the computer [2].
c Unroute the speaker cable from its routing channel on the system [3].
4 Lift the speakers from the computer.
26
Removing and installing components
To Next Page
Loading...
