Installing the coincell battery
1 Place the coin cell into the slot on the system board.
2 Connect the battery cable to the system board.
3 Install the:
a battery
b base cover
4 Follow the procedure in After working inside your computer
Heat sink
Removing the heatsink
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
3 To remove the heatsink:
a Loosen the 4 captive screws in the order shown on the heatsink [1], and then remove another 3 screws [2] to release the
heatsink.
.
28
Removing and installing components
To Next Page
Loading...
