Installing the LCD bezel
1 Replace the bezel and gently press on the edges to snap the bezel into place.
2 Install the:
a display assembly
b Installing the WWAN card
c Installing the WLAN card
d battery
e base cover
3 Follow the procedure in After working inside your computer
Camera
Removing the camera
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b Removing the WLAN card
c Removing the WWAN card
d display assembly
e LCD bezel
3 Peel o the adhesive tape that secures the camera to LCD back cover [1] and disconnect the camera cable [2].
4 Lift the camera to release it from the adhesive securing it to the LCD back cover [3].
Removing and installing components
43
To Next Page
Loading...
