a display assembly
b WLAN
c WWAN
d battery
e base cover
6 Follow the procedure in After working inside your computer
Power button board
Removing power button board
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c System fan
d Removing the WLAN card
e Removing the WWAN card
f display assembly
3 To remove the power button board:
a Disconnect the power button board cable from its connector on the system board [1] and peel the adhesive to release it [2].
b Remove the M2x2 screw that secures the power button board to the system [3].
c Remove the adhesive tape that secures the power button cable to the system [4].
d Lift the power button board from the system [5].
Removing and installing components
41
To Next Page
Loading...
