e LCD bezel
f LCD panel
3 Remove the 8 M2.5x2.52 M2x2 screws that secure the metal brackets to the LCD back cover [1].
4 Remove the LCD hinge from the system [2].
Installing the LCD hinge
1 Place the left and right hinge brackets on the LCD back cover, align with the lock tabs on the side of LCD back cover.
2 Tighten the screws to secure the left and right hinge brackets to the LCD back cover.
3 Install the:
a LCD panel
b LCD bezel
c display assembly
d Installing the WLAN card
e WWAN card
f battery
g base cover
4 Follow the procedure in After working inside your computer
eDP and camera cable
Removing the eDP and camera cable
1 Follow the procedure in Before working inside your computer.
2 Remove the:
Removing and installing components
47
To Next Page
Loading...
