Dell Latitude 7390 2-in-1 - Installing Keyboard to the Keyboard Tray; Installing Keyboard Assembly

Installing keyboard to the keyboard tray
1 Align the keyboard with the screw holders on the keyboard tray.
2 Tighten the 6 (M2.0 x 2.0) screws to secure the keyboard to the keyboard tray.
3 Install the Keyboard.
Installing keyboard assembly
NOTE
: The keyboard and the keyboard tray together are called the keyboard assembly.
1 Align the keyboard assembly with the screw holders on the chassis.
2 Replace the 13 (M2.0 x 3.0) screws that secure the keyboard to the chassis.
3 Ax and connect the keyboard and the backlit keyboard cables to the keyboard.
4 Ax the LED board cable on the keyboard.
5 Ax the SSD thermal pad on the SSD module.
NOTE
: If your computer has a WWAN card, then SIM card tray installation is a requirement.
6 Install the:
a System baord
b Heatsink module
c WWAN card
d WLAN card
e SSD card
f Battery
g Base cover
h SIM card tray
i Micro SD
NOTE
: To install both cards if equipped.
7 Follow the procedure in After working inside your computer.
34
Removing and installing components