Dell Latitude 7390 2-in-1 - System Configuration Screen Options

Option Description
Boot sequence
options
• Windows boot manager
• WindowsIns
Boot list options
• Legacy
• UEFI—selected by default
Advanced Boot
Options
This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is disabled.
Enable Attempt Legacy Boot is disabled by default.
UEFI boot path
security
• Always, except internal HDD
• Always
• Never
Date/Time Allows you to change the date and time.
System Conguration screen options
Option Description
SATA Operation Allows you to congure the internal SATA hard-drive controller. The options are:
• Disabled
• AHCI
• RAID On: This option is enabled by default.
Drives Allows you to congure the SATA drives on board. All drives are enabled by default. The options are:
• SATA-2 — enabled by default
• M.2 PCIe SSD-0 — enabled by default
• M.2 PCIe SSD-1 — enabled by default
SMART Reporting This eld controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self-Monitoring Analysis and Reporting Technology) specication. This option is
disabled by default.
• Enable SMART Reporting
USB Conguration
This is an optional feature.
This eld congures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices—HDD, memory key, oppy.
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
• Enable USB Boot Support—enabled by default
• Enable External USB Port—enabled by default
System setup 49