Dell Latitude E6410 - Display Bezel Removal and Replacement

Back to Removing and Replacing Parts
Display Bezel
Dell™Latitude™E6410/E6410ATGServiceManual
Removing the Display Bezel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery.
3. Starting from the bottom, gently pry the display bezel inside out from the display assembly using a plastic scribe.
4. When all the snaps loosen, remove the display bezel from the display assembly.
Replacing the Display Bezel
To replace the display bezel, perform the above steps in reverse order.
Back to Removing and Replacing Parts
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe®Flash®Player from Adobe.com in order to view the illustrations below.