Dell Networking N4000 Series Getting Started Guide

Mengaktifkan dan Mengkonfigurasi Switch 167
. Setup the IP address for the Management Interface.
(Menentukan alamat IP untuk Antarmuka
Pengelolaan.)
. Setup the default gateway if IP address is
manually configured on both routing and OOB
interface. (Tetapkan gerbang default jika alamat
IP dikonfigurasi secara manual baik untuk routing
dan antarmuka OOB.)
Would you like to setup the Out-Of-Band interface now?
(Apakah Anda ingin menetapkan antarmuka Out-Of -Band
sekarang?) [Y/N] y
Silakan masukkan alamat IP piranti (A.B.C.D) atau
masukkan "DHCP" (tanpa tanda petik) untuk secara
otomatis meminta alamat IP dari server DHCP jaringan.
[192.168.2.1]:
Please enter the IP subnet mask (A.B.C.D or /nn).
(Masukkan mask subnet IP (A.B.C.D atau /nn).
[255.255.255.0]:
This is the configuration information that has been
collected: (Berikut adalah konfigurasi yang dapat
dikumpulkan:)
User Account setup = root (Penetapkan Akun Pengguna =
root)
Password = ******** (Kata Sandi = ******** )
Out-of-band IP address = 192.168.2.1 255.255.255.0
(Alamat IP Out-of-band = 192.168.2.1 255.255.255.0)
Final Step: (Langkah Terakhir)
If the information is correct, please enter (Y) to
save the configuration, and copy the settings to the
start-up configuration file. (Jika informasi ini
benar, pilih (Y) untuk menyimpan konfigurasi, dan
menyalinnya ke file konfigurasi start-up.) If the
information is incorrect, enter (N) to discard the

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)