Dell Networking N4000 Series Getting Started Guide

Inicialização e configuração do comutador 253
To access the switch through any Management Interface
you can (Para acessar o comutador através de qualquer
Interface de Gerenciamento, você pode)
. Setup the IP address for the Management Interface.
(Configurar o endereço IP para a Interface de
Gerenciamento.)
. Setup the default gateway if IP address is
manually configured on both routing and OOB
interface. (Configure o gateway padrão caso o
endereço IP seja configurado manualmente tanto na
interface OOB quanto no encaminhamento).
Would you like to setup the Out-Of-Band interface now?
(Deseja configurar a interface Out-Of-Band?) [Y/N]
(S/N)y (s)
Please enter the IP address of the device (A.B.C.D) or
enter "DHCP" (without the quotes) to automatically
request an IP address from the network DHCP server.
(Insira o endereço IP do dispositivo (A.B.C.D) ou
insira “DHCP” (sem as aspas) para solicitar
automaticamente um endereço IP do servidor DHCP da
rede.) [192.168.2.1]:
Please enter the IP subnet mask (A.B.C.D or /nn).
(Insira a máscara de sub-rede IP (A.B.C.D ou /nn)).
[255.255.255.0]:
This is the configuration information that has been
collected: (Essas são as informações de configuração
que foram coletadas:)
User Account setup = root (Configuração da conta de
usuário = raiz)
Password (Senha) = ********
Out-of-band IP address (Endereço IP OOB) = 192.168.2.1
255.255.255.0

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)