372 |הלעפה תרדגהו הרוצתה לש גתמה
CLI
To setup a user account:
Please enter the user name.[root]:
Please enter the user password:
Please reenter the user password:
Step 3:
Next, IP addresses are setup on the OOB (Out-Of-Band)
Interface and/or the VLAN1 routing interface.
IP
OoBVLAN1
You can use these IP addresses to access the CLI, Web
interface, or SNMP interface of the switch.
IP
CLISNMP
To access the switch through any Management Interface
you can
. Setup the IP address for the Management
interface.
IP
To Next Page
Loading...
