About this guide
This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting, inserting optional
modules, and connecting to a power source.
CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this equipment.
WARNING: Only trained and qualied personnel can install this equipment. Read this guide before you install and power up this
equipment. This equipment contains two power cords. Disconnect both power cords before servicing.
WARNING: This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.
Figure 1. Class 1 laser product
NOTE
: When no cable is connected, visible and invisible laser radiation may be emitted from the aperture of the optical
transceiver ports. Avoid exposure to laser radiation and do not stare into open apertures.
Related documents
For more information about the S4048–ON system, see the following documents:
• Dell Networking S4048–Open Networking (ON) Getting Started Guide
• Dell Networking S4048–Open Networking (ON) Release Notes
• Dell Open Networking Troubleshooting Guide
NOTE
: For the most recent documentation, visit Dell Support: www.dell.com/support.
1
About this guide 5
To Next Page
Loading...
