Dell NX3230 - Hard Disk Drive Indicator Codes

Icon Description Condition Corrective action
• Ambient temperature is too high.
• External airflow is obstructed.
See the Getting help section in this
document.
Memory
indicator
The indicator blinks amber if
a memory error occurs.
See the system event log or system
messages for the location of the failed
memory. Reinstall the memory device. If
the issue persists, see the Getting help
section in this document.
PCIe
indicator
The indicator blinks amber if
a PCIe card experiences an
error.
Restart the system. Update any required
drivers for the PCIe card. Re-install the
card. If the issue persists, see the Getting
help section in this document.
NOTE: For more information on
supported PCIe cards, see the
Expansion Card Installation Guidelines
section in this document.
Hard disk drive indicator codes
Figure 2. HDD indicators
1. HDD activity indicator 2. HDD status indicator
3. HDD
NOTE: If the HDD is in Advanced Host Controller Interface (AHCI) mode, the status indicator (on the
right side) does not function and remains turned off.
11