13. HDD backplane
Cooling shroud
Removing cooling shroud
Prerequisites
1. Ensure that you read the Safety instructions section in this document.
2. Complete the tasks listed in the Before working inside your system section in this document.
3. If installed, remove the full-length PCIe card.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: Never operate your system with the cooling shroud removed. The system may get
overheated quickly, resulting in shutdown of the system and loss of data.
Steps
Hold the touch points and lift the shroud away from the system.
Figure 11. Removing and installing the cooling shroud
1. cooling shroud 2. touch point (2)
Next steps
1. Replace the cooling shroud. See Installing the cooling shroud section in this document.
2. Complete the tasks listed in the After working inside your system section in this document.
46
To Next Page
Loading...
