Dell NX3230 - Miscellaneous Settings Screen

Secure Boot Custom Policy Settings screen
Secure Boot Custom Policy Settings is displayed only when Secure Boot Policy is set to Custom.
In the System Setup Main Menu, click System BIOS → System Security → Secure Boot Custom Policy
Settings.
Menu Item Description
Platform Key Imports, exports, deletes, or restores the platform
key (PK).
Key Exchange Key Database Allows you to import, export, delete, or restore
entries in the Key Exchange Key (KEK) Database.
Authorized Signature Database Imports, exports, deletes, or restores entries in the
Authorized Signature Database (db).
Forbidden Signature Database Imports, exports, deletes, or restores entries in the
Forbidden Signature Database (dbx).
Miscellaneous Settings screen
You can use the Miscellaneous Settings screen to perform specific functions such as updating the asset
tag, and changing the system date and time.
You can view the Miscellaneous Settings screen by clicking System Setup Main Menu → System BIOS →
Miscellaneous Settings.
Menu Item Description
System Time Enables you to set the time on the system.
System Date Enables you to set the date on the system.
Asset Tag Displays the asset tag and enables you to modify it
for security and tracking purposes.
Keyboard NumLock Enables you to set whether the system boots with
the NumLock enabled or disabled. By default,
Keyboard NumLock is set to On.
NOTE: This option does not apply to 84-key
keyboards.
F1/F2 Prompt on Error Enables or disables the F1 or F2 feature in case of
an issue. By default, F1/F2 Prompt on Error is set
to Enabled. The F1/F2 prompt also includes
keyboard errors.
Load Legacy Video Option ROM Enables you to determine whether the system
BIOS loads the legacy video (INT 10H) option ROM
from the video controller. Selecting Enabled in the
OS does not support UEFI video output standards.
This field is only for UEFI boot mode. You cannot
set this to
Enabled if UEFI Secure Boot mode is
enabled.
In-System Characterization This option enables or disables In-System
Characterization. By default, In-System
Characterization is set to Disabled. The two other
options are Enabled and Enabled - No Reboot.
35