Installing a 3.5-inch HDD blank
Prerequisites
1. Ensure that you read the Safety instructions section in this document.
2. If installed, remove the front bezel.
Steps
Insert the HDD blank into the HDD slot until the release button clicks into place.
Next steps
If applicable, install the front bezel.
Removing a 2.5-inch HDD blank (back)
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Ensure that you read the Safety instructions section in this document.
CAUTION: To maintain proper system cooling, all empty HDD slots must have drive blanks
installed.
Steps
Pull the hard-drive blank out until it is free of the HDD slot.
58
To Next Page
Loading...
