Dell NX3230 - Page 78

Figure 29. Identifying connectors on the expansion card riser 3 (default)
1. expansion card slot 6 2. expansion card slot 7
3. power connector (for GPU cards)
Figure 30. Identifying connectors on the expansion card riser 3 (alternate)
1. expansion card slot 6 2. power connector (for GPU cards)
Next steps
1. If applicable, remove or install an expansion card on the riser.
2. If applicable, replace the expansion card riser.
3. Complete the tasks listed in After working inside your system section in this document.
78