Next steps
1. Install the display panel.
2. Install the antenna module.
3. Install the side-I/O board.
4. Install the microphones.
5. Install the power-button board.
6. Install the system board.
7. Install the camera assembly.
8. Install the speakers.
9. Install the rear-I/O bracket.
10. Install the bottom cover.
11. Install the wireless card.
12. Install the hard-drive.
13. Install the system-board shield.
14. Install the back cover
15. Install the cable cover (optional).
16. Install the stand.
17. Follow the procedure in After working inside your computer.
Removing and installing components 79
To Next Page
Loading...
