b Remove the coin cell battery from the connector on the system board [2].
Installing coin cell battery
1 Hold the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the connector.
2 Press the battery into the connector until it locks into place.
3 Install the:
a expansion card
b cooling shroud
c cover
4 Follow the procedure in After working inside your computer.
Optical drive
Removing optical drive
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a cover
b front bezel
c cooling shroud
20
Disassembly and reassembly
To Next Page
Loading...
