e cover
4 Follow the procedure in After working inside your computer.
Speaker
Removing speaker
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a cover
b front bezel
c 2.5 inch hard drive assembly
d cooling shroud
e optical drive
3 To remove the speaker:
a Disconnect the speaker cable from the connector on the system board [1].
b Press the release tabs [2], and slide the speaker module [3] out of the slot.
Installing speaker
1 Insert the speaker into the slot and press it until it clicks into place.
2 Connect the speaker cable to the connector on the system board.
Disassembly and reassembly
35
To Next Page
Loading...
