Dell OptiPlex XE4 Small Form Factor User Manual

NOTE: Removing the coin-cell battery resets the BIOS setup program settings to default. It is recommended that you note
the BIOS setup program settings before removing the coin-cell battery.
About this task
The following images indicate the location of the coin-cell battery and provide a visual representation of the removal procedure.
Steps
1. Using a plastic scribe, gently pry the coin-cell battery out of the slot on the system board.
2. Remove the coin-cell battery away from the computer.
Installing the coin-cell battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the coin-cell battery and provides a visual representation of the installation
procedure.
38
Removing and installing components

Dell OptiPlex XE4 Small Form Factor Specifications

General

Brand	Dell
Model	OptiPlex XE4 Small Form Factor
Category	Desktop
Language	English