Dell OptiPlex XE4 Small Form Factor User Manual

4. Loosen the single screw (M2x5) securing the standoff nut to the Dell Ultra Speed Drive.
5. Remove the standoff nut from the SSD.
6. Slide the SSD out of the M.2 slot on the Dell Ultra Speed Drive.
Installing the Dell Ultra Speed Drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the Dell Ultra Speed Drive and provides a visual representation of the installation
procedure.
Removing and installing components 47

Dell OptiPlex XE4 Small Form Factor Specifications

General

Brand	Dell
Model	OptiPlex XE4 Small Form Factor
Category	Desktop
Language	English