EasyManua.ls Logo

Dell PowerEdge M630 - Page 35

Dell PowerEdge M630
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Related links
Memory Settings
Memory Settings details
Memory Settings details
The Memory Settings screen details are explained as follows:
Option Description
System Memory
Size
System Memory
Type
System Memory
Speed
System Memory
Voltage
Specifies the memory size in the system.
Specifies the type of memory installed in the system.
Specifies the system memory speed.
Specifies the system memory voltage.
Video Memory
Specifies the amount of video memory.
System Memory
Testing
Memory Operating
Mode
Specifies whether the system memory tests are run during system boot. Options are
Enabled
and
Disabled
.
This option is set to Disabledbydefault.
Specifies the memory operating mode. The options available are
Optimizer Mode
,
Advanced ECC Mode
,
Mirror Mode
,
Spare Mode
,
Spare with Advanced ECC Mode
,
Dell Fault Resilient Mode
and
Dell NUMA
Fault Resilient Mode
. This option is set to
Optimizer Mode
by default.
NOTE: The Memory Operating Mode option can have
different
default and available options based
on the memory
configuration
of your system.
NOTE: The Dell Fault Resilient Mode option establishes an area of memory that is fault resilient.
This mode can be used by an operating system that supports the feature to load critical
applications or enables the operating system kernel to maximize system availability.
Node Interleaving Specifies if Non-Uniform Memory architecture (NUMA) is supported. If this field is set to Enabled, memory
interleaving is supported if asymmetric memory configuration is installed. If the field is set to Disabled, the
system supports NUMA (asymmetric) memory configurations. This option is set to
Disabled
by default.
Snoop Mode
Specifies the Snoop Mode options. The Snoop Mode options available are
Home Snoop
,
Early Snoop
, and
Cluster on Die. This option is set to Early Snoop by default. This field is available only when the Node
Interleaving
issetto
Disabled
.
Related links
Memory Settings
Viewing Memory Settings
Processor Settings
Youcan use the Processor Settingsscreen to viewthe processor settings, and perform specific functions such as enabling
virtualization technology, hardware prefetcher, and logical processor idling.
Related links
Processor Settings details
System BIOS
Viewing Processor Settings

Table of Contents

Other manuals for Dell PowerEdge M630

Related product manuals