Dell PowerEdge M630 - Installing a Hard Drive or SSD Blank

91
Step
Press the release latch and slide the hard drive or SSD blank out of the hard drive or SSD slot.
Figure 44. Removing a 2.5-inch hard drive
1. hard drive or SSD blank 2. release latch
Figure 45. Removing a 1.8-inch SSD blank
1. SSD blank 2. release latch
Next step
1. Install the hard drive or SSD.
Related links
Safety instructions
Installing a hard drive or SSD
Installing a hard drive or SSD blank
Prerequisites
1. Follow the safety guidelines listed in safety instructions section.
2. Remove a hard drive or SSD.