46
Dell Lifecycle Controller
Dell Lifecycle Controller (LC) provides advanced embedded systems management capabilities including system deployment,
configuration, update, maintenance, and diagnosis. LC is delivered as part of the iDRAC out-of-band solution and Dell system
embedded Unified Extensible Firmware Interface (UEFI) applications.
Related links
Embedded system management
Embedded system management
The Dell Lifecycle Controller provides advanced embedded systems management throughout the system’s lifecycle. The Dell
Lifecycle Controller can be started during the boot sequence and can function independently of the operating system.
NOTE: Certain platform
configurations
may not support the full set of features provided by the Dell Lifecycle Controller.
Formoreinformationaboutsettingupthe Dell LifecycleController,configuringhardwareandfirmware, anddeployingtheoperating
system, see the Dell Lifecycle Controller documentation at
Dell.com/idracmanuals
.
Related links
Dell Lifecycle Controller
Boot Manager
The Boot Manager screen enables you to select boot options and diagnostic utilities.
Related links
Boot Manager main menu
System BIOS
Viewing Boot Manager
Viewing Boot Manager
To enter
Boot Manager
:
1.
Turn on, or restart your system.
2.
Press F11 when you see the following message:
F11 = Boot Manager
If your operating system begins to load beforeyoupress F11, allow the system to complete the booting, andthen restart your
system and tryagain.
Related links
Boot Manager
Boot Manager main menu
Boot Manager main menu
Menu item Description
Continue Normal
Boot
One-shot Boot
Menu
Launch System
Setup
The system attempts to boot to devices starting with the first item in the boot order. If the boot attempt
fails, the system continues with the next item in the boot order until the boot is successful or no more boot
options are found.
Enables you to access boot menu, where you can select a one-time boot device to boot from.
Enables you to access System Setup.
To Next Page
Loading...
