42
Related links
Serial Communication
Serial Communication details
Serial Communication details
The
Serial Communication
screen details are explained as follows:
Option Description
Serial
Communication
Enables the COM port or Console Redirection options. This option is set to Off by default.
Serial Port Address Enables you to set the port address for serial devices. This option is set to Serial Device 1=COM2, Serial
Device 2=COM1
by default.
NOTE: Youcan use only Serial Device 2 for the Serial Over LAN (SOL) feature. Touse console
redirection by SOL,
configure
the same port address for console redirection and the serial device.
External Serial
Connector
Enables you to associate the External Serial Connector to Serial Device 1.
Failsafe Baud Rate Specifies the failsafe baud ratefor console redirection. The BIOS attempts to determine the baud rate
automatically. This failsafe baud rateis used onlyif the attempt fails, and the value must not be changed.
This option is set to 115200 by default.
Remote Terminal
Type
Redirection After
Boot
Related links
Sets the remote console terminal type. This option is set to VT 100/VT 220 by default.
Enables or disables the BIOS console redirection when the operating system is loaded. This option is set to
Enabled
by default.
Serial Communication
Viewing Serial Communication
System
Profile
Settings
You can use the System Profile Settings screen to enable specific system performance settings such as power management.
Related links
System Profile Settingsdetails
System BIOS
Viewing System Profile Settings
Viewing System Profile Settings
To view the System Profile Settings screen, perform the following steps:
1.
Turn on, or restart your system.
2.
Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to
finish
booting, and then
restart your system and try again.
3.
On the System Setup Main Menu screen, click System BIOS.
4.
On the System BIOS screen, click System Profile Settings.
Related links
System Profile Settings
System Profile Settings details
System Profile Settings details
The System Profile Settings screen details are explained as follows: