Dell PowerEdge M630 - Page 83

83
Figure 35. Installing and removing a processor
1. socket-release lever 1 2. pin
–
1cornerof the processo
r
3. processor 4. slot (4)
5.
processor shield 6. socket-release lever2
7.
processor socket 8. tab (4)
Example
Enter an example that illustrates the current task (optional).
Next steps
1. Replace theprocessor(s).
2. Install the heatsink.
3. Reinstall the cooling shroud.
4. Followthe procedure listed inthe After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing the cooling shroud
Removing a heat sink
Installing a processor
Installing a heat sink
Removing the cooling shroud
After working inside your system