Dell PowerEdge R860 - Page 125

Figure 87. Riser 4B
1. Slot 8
2. Slot 7
Figure 88. Riser 4C
1. Slot 8
2. Slot 7
NOTE: The expansion-card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion
cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be
installed in the card priority and slot priority order.
Table 91. Expansion card riser configurations
Configurations Expansion card
risers
PCIe Slots Form factor Controlling
processor
Slot's electrical
bandwidth/
physical
connector
Config0. 4 x8 FH R1B 1 Full height Processor 1 PCIe Gen4 x8 (x16
connector)
2 Full height Processor 1 PCIe Gen4 x8 (x16
connector)
Installing and removing system components 125