Dell PowerEdge T30 - Page 27

Option Description
• Disabled
• AHCI
• RAID On
By default, the RAID On option is selected.
Drives Allows you to configure the SATA drives on the system board. The available options are:
• SATA-0
• SATA-1
• SATA-2
• SATA-3
By default, all SATA drives are selected.
SMART Reporting Specifies the hard-drive errors for the integrated drives that are reported during system startup.
This technology is part of the SMART (Self Monitoring Analysis and Reporting Technology)
specification.
SMART Reporting is set to Enable SMART Reporting. By default, this option is disabled.
USB Configuration Allows you to enable or disable the USB port configuration. The available options are:
• Enable Boot Support
• Enable Front USB Ports
• Enable rear USB Ports
Front USB Configuration Allows you to enable or disable the front USB ports. The available options are:
• Front Port 1
• Front Port 2
• Front Port 3
• Front Port 4
Rear USB Configuration Allows you to enable or disable the rear USB ports. The available options are:
• Rear Port 1
• Rear Port 2
• Rear Port 3
• Rear Port 4
• Rear Port 5
• Rear Port 6
USB PowerShare Allows you to enable or disable USB PowerShare.
USB PowerShare is set to Enable USB PowerShare. By default, this option is disabled.
Miscellaneous devices Allows you to enable or disable various devices on the system board.
Miscellaneous devices is set to Enable PCI Slot. By default, this option is enabled.
Table 24. Video
Option Description
Primary Display Allows you to configure primary video controller when there are multiple controllers available. The
available options are:
• Auto
System Setup 27