Option Description
Password Change Allows you to enable the disable permission to the System passwords when the administrator
password is set.
Password Change is set to Allow Non-Admin Password Changes.
TPM 1.2 Security Allows you to control whether the Trusted Platform Module (TPM) is visible to the operating
system. The available options are:
• TPM On
NOTE: The following options are available only if the TPM On option is enabled.
• PPI Bypass for Enable Commands
• PPI Bypass for Disable Commands
• Disabled
• Enabled
• Clear
By default, the TPM On option is selected.
NOTE: If you have upgraded the TPM 1.2 version to TPM 2.0 version, then the available
option is TPM 2.0 Security.
Computrace (R) Allows you to activate or disable the optional Computrace software. The available options are:
• Deactivate
• Disable
• Activate
By default, the Deactivate option is selected.
CPU XD Support Allows you to enable the Execute Disable mode of the processor.
By default, CPU XD Support is set to Enable CPU XD Support.
OROM Keyboard Access Allows you to determine whether users are able to enter Option ROM Configuration screens using
shortcut keys during boot. The available options are:
• Enable
• One Time Enable
• Disable
By default, the Enabled option is selected.
Admin Setup Lockout Allows you to prevent users from entering Setup when an administrator password is set.
Admin Setup Lockout is set to Enable Admin Setup Lockout. By default, this option is disabled.
Table 26. Secure Boot
Option Description
Secure Boot Enable Allows you to enable or disable the Secure Boot Feature. The available options are:
• Disabled
• Enabled
By default, the Disabled option is selected.
Expert Key Management Allows you to enable or disable Custom Mode Key Management.
System Setup 29
To Next Page
Loading...
