Option Description
Expert Key Management is set to Enable Custom Mode. By default, this option is disabled.
If the Enable Custom Mode option is enabled, the available options are:
• PK
• KEK
• db
• dbx
Table 27. Performance
Option Description
Multi Core Support This field specifies whether the processor has one or all cores enabled. The performance of some
applications improve with the additional cores. Allows you to enable or disable multi-core support
for the processor. The available options are:
• All (Default)
• 1
• 2
• 3
By default, the All option is selected.
NOTE:
• The options displayed could be different depending on the installed processor.
• The options depend on the number of cores supported by the installed processor (All, 1,
2, N-1 for N-Core Processors)
Intel SpeedStep Allows you to enable or disable the Intel SpeedStep feature.
Intel SpeedStep is set to Enable Intel SpeedStep.
C-States Control Allows you to enable or disable the additional processor sleep states.
By default, C-States Control is set to C states.
Limit CPUID Value This field limits the maximum value the processor Standard CPUID Function supports.
Intel® TurboBoost
Allows you to enable or disable Intel® TurboBoost mode of the processor. If the system supports
Intel Xeon E3-1225 processor, then by default Intel® TurboBoost is enabled.
Table 28. Processors supporting the Intel® TurboBoost configuration
Processor type Supports Intel® TurboBoost
Intel Core I3-6100 No
Intel Xeon E3-1225 Yes
Intel Pentium G4400 No
Hyper-Thread Control
Allows you to enable or disable the Hyper-Threading technology. If the system supports Intel Core
I3-6100 or Intel Xeon E3-1225 processor, then by default Hyper-Thread Control is enabled.
30 System Setup
To Next Page
Loading...
