Option Description
Table 29. Processors supporting the Hyper-Thread Control configuration
Processor type Supports Hyper-Thread Control
Intel Core I3-6100 Yes
Intel Xeon E3-1225 Yes
Intel Pentium G4400 No
Table 30. Power management
Option Description
Auto On Time Allows you to set the time at which the system must turn on automatically. The available options
are:
• Disabled
• Every Day
• Weekdays
• Select Days
By default, the Disabled option is selected.
Fan Control Override Allows you to control the speed of the system fan. By default, this option is disabled.
Wake on LAN This option allows the system to power up from the off state when triggered by a special LAN
signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the
operating system. This feature only works when the system is connected to AC power supply. The
available options are:
• Disabled
• LAN Only
• LAN with PXE
By default, the Disabled option is selected.
Table 31. POST behavior
Option Description
Numlock LED Allows you to specify if the NumLock function is enabled when the system boots. By default, this
option is enabled.
MEBx Hotkey Allows you to specify the MEBx shortcut key function must be enabled when the system boots. By
default, this option is enabled.
Keyboard Errors Specifies the keyboard-related errors are reported when it boots. By default, this option is enabled.
Table 32. Virtualization support
Option Description
Virtualization This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization technology.
System Setup 31
To Next Page
Loading...
