116 Installing System Components
10
Connect any expansion-card cables for the new card.
See the documentation that came with the card for information about its
cable connections.
11
Close the system. See "Closing the System" on page 86.
12
Place the system upright and on its feet on a flat, stable surface.
13
Rotate the system feet outward.
14
Reattach any peripherals and connect the system to an electrical outlet.
15
Turn on the system and attached peripherals.
16
Install any device drivers required for the card as described in the
documentation for the card.
book.book Page 116 Monday, June 15, 2009 11:33 AM
To Next Page
Loading...
