126 Installing System Components
Figure 3-20. Removing and Installing a NIC Hardware Key
7
Install the integrated storage controller card. See "Installing an Integrated
Storage Controller Card" on page 134.
8
Close the system. See "Closing the System" on page 86.
9
Place the system upright and on its feet on a flat, stable surface.
10
Rotate the system feet outward.
11
Reattach any peripherals, then connect the system to the electrical outlet.
12
Turn on the system and attached peripherals.
1 NIC hardware key 2 ISCSI_KEY connector
2
1
book.book Page 126 Monday, June 15, 2009 11:33 AM
To Next Page
Loading...
