Dell PowerVault 110T DLT VS80 User Manual

Getting Started 7
Getting Started
Introduction
Your Dell™ PowerVault™ Data Protection Solution is preconfigured for quick
and simple deployment. Some configuration settings are unique to your IT
environment and must be entered upon initial use. This document provides
the information needed to configure the system for your specific IT
environment.
NOTE: Prior to deploying your system, review the Dell PowerVault Data Protection
Solution Information Update for the latest information.
NOTE: For documents referenced in this guide, see the Dell PowerVault Data
Protection Solution Quick Reference Guide at support.dell.com.
Supported Systems Information
The PowerVault Data Protection Solution is based on Microsoft
®
System
Center Data Protection Manager (DPM) 2007, which is preconfigured to run
on a Dell PowerVault system. It is important to know your PowerVault system
model when you require support from Dell, install additional hardware, or
reinstall the PowerVault Data Protection Solution software. Dell
OpenManage™ system management applications recognize and report your
system model information.
Table 1-1. PowerVault Data Protection Solutions and System Models
Data Protection Solution System Model
PowerVault DP100 PowerVault 100
PowerVault DP500 PowerVault 500
PowerVault DP600 PowerVault 600

Dell PowerVault 110T DLT VS80 Specifications

General

Brand	Dell
Model	PowerVault 110T DLT VS80
Category	Storage
Language	English