PowerVault (Dell MD1400) Setup Guide
10. Type y and press Enter to confirm that you backed up the Passphrase.
Caution: You must back up the Passphrase and retain this backup in a secure location. If
your PERC adapter hardware fails, you cannot recover any data on encrypted disks
without the Passphrase.
The following output and prompt is displayed.
Creating new volume group decodersmall on /dev/sde
Volume group "decodersmall" successfully created
Creating new volume group decoder on /dev/sde
Volume group "decoder" successfully created
Additional enclosures available! Rerunning to add additional storage
The enclosure DEL MD1400 ID: 73 supports encryption, enable
encryption for this device y/n?
11. Type y and press Enter to enable encryption for this device.
The following output and prompt is displayed.
Creating new volume group decodersmall0 on /dev/sde
Volume group "decodersmall0" successfully created
Creating new volume group decoder0 on /dev/sde
Volume group "decoder0" successfully created
Additional enclosures available! Rerunning to add additional storage
The enclosure DEL MD1400 ID: 73 supports encryption, enable
encryption for this device y/n?
12. Type y and press Enter to enable encryption for this device.
The following output and prompt is displayed.
Creating new volume group decodersmall1 on /dev/sde
Volume group "decodersmall1" successfully created
Creating new volume group decoder1 on /dev/sde
Volume group "decoder1" successfully created
Additional enclosures available! Rerunning to add additional storage
The enclosure DEL MD1400 ID: 73 supports encryption, enable
encryption for this device y/n?
Install PowerVault with Encryption on a Series 6 R640 Host 38
To Next Page
Loading...
