Table 7. Screw list (continued)
Component Screw type Quantity Image
System board M3x4
#6-32
3
4
Riser card M3x5
2
Boční kryt
Removing the top cover (side bezel)
Prerequisites
1. Follow the procedure in before working inside your computer.
NOTE: Turn the optional SMA antenna downwards or remove it for convenient sliding of the top cover (side bezel).
About this task
The following image indicates the location of the top cover (side bezel) and provides a visual representation of the removal procedure.
Demontáž a opětovná montáž
21
To Next Page
Loading...
