4. Install the side cover.
5. Follow the procedure in after working inside your computer.
Reproduktor
Removing the speaker
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the top cover (side bezel).
4. Remove the front bezel.
About this task
The following images indicate the location of the speaker and provide a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable from the system board.
2. Press the release tab and lift the speaker along with the cable from the system board.
Installing the speaker
Prerequisites
Jestliže nahrazujete určitou součástku, vyjměte před montáží stávající součástku.
About this task
The following image indicates the location of the speaker and provides a visual representation of the installation procedure.
40
Demontáž a opětovná montáž