Dell Precision 3240 Compact - Installing the M.2 2280 Pcie Solid-State Drive

3. Remove the top cover (side bezel).
4. Remove the front bezel.
5. Remove the fan assembly.
NOTE: This step is valid for system configuration that is shipped with 80 W CPU.
6. Remove the riser card.
7. Remove the hard-drive assembly.
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure.
Steps
1. Remove the screw (M2x3.5) that secures the solid-state drive to the system board.
2. Slide and lift the solid-state drive off the system board.
Installing the M.2 2280 PCIe solid-state drive
Prerequisites
Jestliže nahrazujete určitou součástku, vyjměte před montáží stávající součástku.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the installation procedure.
36
Demontáž a opětovná montáž